New Products

    To Fit Carrier

    • Bearings
      • BRG-0633 - PTFE Main Bushing for Model 6D; Available Now
      • BRG-0636 - Motor Side Main Bushing, PTFE Lined for Model 06E; Available July 2010
      • BRG-0638 - Crankcase Side Main Bushing, PTFE Lined for Model 06E; Available July 2010
    • Crankcase Heaters
      • HTR-0609 - 120V Crankcase Heater for Models 5H40, 60 , 80, 120; Available Now
      • HTR-0611 - 240V 180W Crankcase Heater for Models 6D, 06E; Available Now
      • HTR-0612 - 120V 180W Crankcase Heater for Models 6D, 06E; Available Now
    • Gasket Kits
      • KIT-0612 - Gasket Kit (Metal Gaskets) for Model 05K; Available August 2010
    • Pistons
      • PST-0610 - Piston (Contoured Top) for Model 05K; Available Now
      • PST-0613 - Piston (Flat Top) for Model 05K; Available Now
    • Seals
      • SEL-0617 - Shaft Seal (without Gland Plate) for Model 05K; Available Now
      • SEL-0618 - Shaft Seal (with Gland Plate) for Model 05K; Available Now

    To Fit Copeland

    • Bearings
      • BRG-1500X010 - PTFE Undersize Main Bushing for Model 3D; Available Now
      • BRG-1500X020 - PTFE Undersize Main Bushing for Model 3D; Available Now
      • BRG-1501X010 - PTFE Undersize Pump End Bushing for Model 3D; Available Now
      • BRG-1501X020 - PTFE Undersize Pump End Bushing for Model 3D; Available Now
      • BRG-1502X010 - PTFE Undersize Motor End Bushing for Model 3D; Available Now
      • BRG-1502X020 - PTFE Undersize Motor End Bushing for Model 3D; Available Now
      • BRG-1504X020 - PTFE Undersize Main Bushing for Models 4, 6 R & D; Available July 2010
      • BRG-1505X020 - PTFE Undersize Main Bushing for Models 4, 6, R & D; Available July 2010
    • Terminal Kits
      • KIT-1583 - Terminal Kit Assembly (New Style) for Models 4R, 6R; Available Now
      • KIT-1584 - Terminal Kit Assembly 50-60 HP for Models 4R, 6R; Available July 2010

    To Fit York

    • Bearings
      • BRG-1132 - Oil Control Main Bushing for Models J, P; Available July 2010
    • Crankshafts
      • CKS-1143 - 4 Cyl. Short Stroke Crankshaft for Model J; Available Now
      • CKS-1144 - 4 Cyl. Long Stroke Crankshaft for Model J; Available Now
      • CKS-1163 - 6 Cyl. Short Stroke Crankshaft for Model J; Available Now
      • CKS-1164 - 6 Cyl. Long Stroke Crankshaft for Model J; Available Now
      • CKS-1183 - 8 Cyl. Short Stroke Crankshaft for Model J; Available Now
      • CKS-1184 - 8 Cyl. Long Stroke Crankshaft for Model J; Available Now
      • CKS-1170 - 4 Cyl. Long Stroke Crankshaft for Model Z; Available Now
      • CKS-1171 - 6 Cyl. Long Stroke Crankshaft for Model Z; Available Now
    • Terminal Kits
      • KIT-1160 - Terminal Kit (Mains) for Models J, P; Available July 2010
      • KIT-1161 - Terminal Kit (Overloads) for Models J, P; Available August 2010
    • Liners
      • LNR-1158 - Cylinder Liner for Models Pa, b; Available Now
      • LNR-1159 - Cylinder Liner for Model Pc; Available Now
    • Pistons
      • PST-1100 - Unloader Piston Assembly for Models J, P; Available August 2010
    • Pumps
      • PMP-1151 - Oil Pump Assembly for Models J, P; Available Now
      • PMP-1152 - Oil Pump Assembly for Model Z; Available Now
    • Plates
      • PLT-1161 - Wave Spring Suction Valve Plate Assembly for Model P; Available Now
      • PLT-1162 - Wave Spring Suction Valve Plate (Bare) for Model P; Available Now
    • Springs
      • SPG-1158 - Discharge Wave Spring for Models J, P; Available Now
    • Strainers
      • SRN-1151 - Oil Strainer for Models J, E Design and Later Available August 2010
      • SRN-1156 - Suction Strainer, 4 and 6 Cylinder for Models J, E Design and Later; Available August 2010
      • SRN-1157 - Suction Strainer, 8 Cylinder for Models J, E Design and Later; Available August 2010
    • Valves
      • VAL-1160 - Suction Valve Reed for Model P; Available Now